Bending
CNC and multi-station bending for tight, repeatable geometries—serpentines, hairpins, U-bends, elbows, and complex 3D routes.
Custom Tube Processing Solutions for HVAC, Refrigeration, & Data Center Cooling
Turnkey tube-processing lines built for coils, circuits, and liquid-cooling assemblies.
We design and integrate the cells that matter most—tube bending, cutting, end forming, welding—with optional fin and finned-tube stages. Share your parts and takt time, and we’ll return a practical line layout that fits your throughput, quality targets, and floor space.
HVAC and Refrigeration Manufacturing
Keep coil and circuit production consistent from first article to volume. We build cells and integrated lines for serpentine coils, hairpins and U-bends, headers, and pre-formed line sets. Clean cuts, precise end forms, stable bends, and reliable welds shorten changeovers and raise first-pass yield. Your team gets a dependable, repeatable flow that slots into existing material handling and inspection.
Faster changeovers and stable takt across shifts
Cleaner joints that assemble and braze without rework
Better repeatability for pitch, angle, and alignment
Smooth hand-off to downstream leak testing and packaging
Data Center Liquid Cooling
For liquid-cooling loops and distribution manifolds, we combine stainless or copper tube bending with clean assembly and traceability. The result is tidy routing, consistent geometry, and fixtures that make operators fast and confident. We can add welding cells and end-of-line checks so the loop is production-ready.
Neat routing with predictable fit-up
Consistent end forms that seal right the first time
Line balance for low operator load and steady takt
Documentation and labeling ready for your MES
Tubing and finned tube equipment
Products We Supply
A focused line card you can configure into single cells or a complete line. No specs here—just the right building blocks for your project.
Tube Bending Machine
CNC, 3D, and continuous bending of coils, circuits and space constrained routing.
Tube Cutting Machine
Clean cuts that prepare tubes for end forming and welding with less downstream rework.
Tube Straightening & Cutting Machine
In-line straightening with synchronized cutting for steady upstream flow.
Tube End Forming Machine
Expand, reduce, flare, bead, and other forms to match your fittings and joint design.
Tube Welding Machine
Stable, operator-friendly welding cells for tube-to-tube and tube-to-fitting assemblies.
Integrated Tube Processing Machine
Straighten, cut, end-form, bend, and weld in one coordinated line with fixtures and handling.
Fin Processing Machine
Fin manufacturing modules that pair with coil production when needed.
Finned Tube Machinery
Finned-tube forming to complement heat-exchange builds.
Custom Tube Processing Machine
Purpose-built equipment or layouts for unique parts, takt, and footprints.
Crafts
What We Can Do
Find all types of commercial heat exchanger machinery crafts offering by BoBo Machine.
Cutting and Preparation
Straight, clean cuts that protect sealing surfaces and set up accurate end forming and welding.
End Forming
Expand, reduce, flare, bead, and other forms matched to your fittings, valves, and manifolds. Fixtures make repeatability easy.
Welding and Assembly
Operator-safe welding cells with simple tooling and clear guidance. Clean, consistent joints built for downstream testing.
Integrated Lines
From single cells to end-to-end lines: handling, fixtures, poka-yokes, guarding, changeover aids, labeling, and traceability.
Process and Quality
Review line layout. We examine parts, takt and flow and map stations and handling.
Certifications
Compliance and Standards
Machine guarding, safety interlocks, and EHS practices are designed to align with project requirements. We support documentation for conformity (for example, CE or UL where applicable) and can prepare training materials and checklists for your site.
Cases
Project Snapshots
HVAC Coil Producer
A plant struggled with variable pitch on serpentine coils and frequent end-form rework. We paired a serpentine bending cell with a clean cutting station and simple fixtures. Pitch variation dropped and first-pass yield rose, while changeovers became a checklist task.
Data Center Cooling Integrator
Stainless routing for a liquid-cooling loop required tidy paths and repeatable end forms. A 3D bending cell with dedicated fixtures plus an end-forming station produced assemblies that fit first time during cabinet build.
Frequently Asked Questions
Got questions? Take a look at our quick answers caring for your concerns.
Can you review our parts and estimate a realistic line layout?
Yes. Share drawings, takt targets, and any workflow constraints. We will outline stations, handling, and fixture concepts so you can align teams fast.
Do you build custom equipment or only standard machines?
BoBo Machine offers you custom alloys and types of tube and finned tube machines, including CNC, 3D bending, straightening, cutting, forming, welding tubing crafts, and parts feeding stations. We supply standard machines and purpose-built equipment. If your parts or takt demand something unique, we will design to those needs. We could also provide private-label or white label services. Customization services are available according to your demands
Does BoBo Machine provide install and tuning services?
Yes. We provide on-site set up services. Install, commissioning, calibration and debugging services are offered by our engineers. You can send us your lead time demands and we offer you ideal solutions.
Does BoBo Machine offer components for replacement after warranty period?
Yes, the cooperation support will not end after the warranty period. But the price of component for replacement should be at cost price, while in the warranty period this price is free. In addition, if you offer a new order of equipment, the price could be communicated.
What INCOTERMS does BoBo Machine accept?
All 11 Types of Delivery Terms Accepted: EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP
Can you connect to our traceability or MES?
We can label outputs and prepare the data your system needs. If required, we can align the line with your existing traceability approach.