Category
EN

 

Products

APPLICATION

Find whole line solution here

LEARN MORE

Multi-function Fin Tube Forming Machine

1. The whole welded components of the bed are not deformed during secondary tempering treatment and vibration.
2. Pneumatic clamping and precision screw driving are adopted.
3. Mitsubishi Electric Appliance.
Inquiry
  • Introduction
  • Parameter
  • Features
  • Application
Introduction
The equipment adopts stepless transmission to control the tightness of the warping piece, so that the warping piece is tightly wound on the smooth tube. The frequency conversion motor is used to adjust the range of pitch (2.3 ~ 5mm), with uniform pitch and high precision. The transmission adopts screw rod and rolling to drive the car to move around circularly. Gearbox; adopt self-developed forward and reverse power transmission system.
 
Carbon steel pipe, stainless steel pipe, copper pipe. G embedded / L type / LLtype / KL type / KLM type; copper aluminum fin heat pipe.
 
Embedded type: the disc type blade is used, the depth of the pipe groove is 0.35 ~ 0.4mm, and the width is 0.5 ~ 0.55mm; the aluminum (copper) sheet is wound in the groove and pressed by the pressing wheel Beside the blade, so that the aluminum (copper) sheet is firmly embedded in the copper pipe or steel pipe.
Multi-function Fin Tube Forming Machine
Parameter
No. Item Spec
1 Maine machine dimension 4950×900×1500mm
2 Loading table 580×900×1000mm
3 Axis distance 1000mm
4 Maine axis speed 800r／min
5 Feeding speed 1200mm/min
6 precision 0.01mm
7 pitch 2.31～6mm
8 Fin height 8～16mm
9 Basic tube OD 14-50.8mm
10 Feeding device diameter Φ19～Φ38 mm
11 Feeding stroke 1000mm
12 Main motor 11kw
13 Feeding motor 3.7kw
14 Cooling motor 120w
15 Smoothing pump motor 180w

​Embedded type:finned tube machine
1. The range of base pipe № 14-50.8mm (carbon steel / stainless steel / copper)
2. Fin - spiral crimp & L base
3. Fin thickness 0.35 to 5mm
4. Suitable for MS, s, GI, copper, aluminum and other materials.
5. Spacing: 2.3-5mm
6. Sheet height: 10 to 16mm
7. Suitable for pipe thickness of 1mm and above.
Note: the thickness of fin is 0.35 ~ 0.5 mm, normal 0.4 mm. Outer diameter of finned tube 39-83mm
 
Multi-function Fin Tube Forming Machine
 
Multi-function Fin Tube Forming Machine

Features
The machine bed is mainly made of steel plate welding structure. Working table, automatic feeding, precision screw drive, circulating cooling, electrical system and gearbox
 
1. Workbench:
The whole welded components of the bed are not deformed during secondary tempering treatment and vibration. On the plane, there are reasonable lifting adjustment, forming wheel, pressing plate, pressing shaft, cutter head, pressing wheel and embossing wheel.

Multi-function Fin Tube Forming Machine

2. Feeding
Pneumatic clamping and precision screw driving are adopted; According to the different size of the pipe diameter, the fixture should be adjusted to the front and behind.
Multi-function Fin Tube Forming Machine
 
3. Electrical system
Mitsubishi Electric Appliance
Multi-function Fin Tube Forming Machine
Application

WOT Condenser Line

Filter Dryer Line

Mesabi Tube Line

Pancake Coil Line